Introduce several factors of hot pressing graphite mold damage
Leave a message
It can be said that the hot-pressed graphite mold can be divided into two aspects: the resistance heating method and the intermediate frequency induction heating method. We need to know that when the resistance heating method is used for sintering, the temperature of the outer mold is lower, and the temperature of the cutter head and the inner mold is higher. factors:
1. Crushing: The graphite mold is in direct contact with the matrix powder containing diamond. Contact surfaces are under high pressure. The difference in hardness between diamond and graphite molds is too large. The surface of the mold that comes into contact with the diamond tool tip creates dimples.
2. The type of impact damage: During the sintering process, the matrix powder infiltrates into the oxidation void of the graphite mold in the molten state, resulting in adhesion between the tool head and the mold, making demoulding difficult. Repeated tapping of the die can demold the die, resulting in chipped edges and metal pits in the die.
3. The wear size of the graphite mold is poor: some matrix powder will be extruded to the surface of the mold in the molten state to adhere to the graphite material. Before the mold can be used next time, the metal residue must be manually removed, causing the shape and size of the mold to be out of tolerance.
4. Surface oxidation and cracks: Since there is no protection of reducing atmosphere in the hot pressing sintering process, graphite is in direct contact with air, and surface oxidation will inevitably occur at high temperatures. The higher the temperature, the faster the oxidation speed; the ore mold is gradually consumed , leaving only part of the carbon and ash, which can be found in the actual production site. After a period of time, pores and carbon dust will develop on the surface of the mold.
5. Fracturing: The cause of this damage is that the side plates of the diamond cutter head are not tightly clamped, resulting in an unbalanced pressure drop on the indenter, resulting in lateral shear forces.







