Home - News - Details

Maintenance And Preservation Of Graphite Crucible

The graphite crucible should be protected from moisture. Graphite crucibles are most afraid of moisture, which will have a great impact on quality. If a damp crucible is used, it will crack, burst, fall off the top and bottom, etc., resulting in the loss of molten metal and even industrial accidents. Therefore, the graphite crucible must be protected from moisture during storage and use.
The warehouse where graphite crucibles are stored should be dry and ventilated, and the temperature should be kept between 5°C and 25°C, and the relative humidity should be 50% to 60%. Do not store crucibles on brick soil or cement ground to avoid moisture. Bulk graphite crucibles should be placed on a wooden frame, preferably 25-30cm above the ground; for packaged parts packed in wooden boxes, wicker baskets or straw bags, sleepers must be placed under the cargo stack, and the distance from the ground should not be lower than 20cm. Laying a layer of linoleum on the sleepers is more conducive to moisture insulation. It must be stacked upside down for a period of time, and the lower layer should be poured on the upper layer, preferably the upper and lower layers should be reversed. The time interval for stacking should not be too long, usually once every two months, if the ground moisture is not high, it can be stacked once every three months. In short, only by inverting the stack frequently can you get a good moisture-proof effect.

Send Inquiry

You Might Also Like