Standardized Cleaning Procedures For Graphite Molds

Systematic graphite mold maintenance is based on maintenance needs and continuity of repair operations, in order to achieve "cost-effective" goals. Attention must be paid to cleaning the graphite mold: formulate a detailed graphite mold cleaning plan, and when cleaning different parts of the graphite mold, such as cleaning inside the press, wiping along the edge, routine cleaning, and cleaning the main part, the cleaning operation methods used are also different. The following explains the standardized cleaning procedures for graphite molds:
After the graphite mold runs for a certain period and has passed the appearance test of electroplating wear, magnetic track mark and graphite mold residue content in vent hole and non-vent area, technicians can determine the procedure and frequency of graphite mold cleaning through visual inspection . Therefore, it is very important to know the period of safe operation of the graphite mold and to document the observation report of the amount of residue accumulation and wear inside the graphite mold.
Based on the fact that graphite molds have a certain operating cycle, all graphite molds should be accompanied by relevant maintenance procedures and documentation of maintenance cycles. Typically, controlling internal grease levels and the behavior of gear broaching, slide blocks, internal pins and bushings, and other moving parts is key to ensuring stable production. Other factors affecting production include contaminated or blocked waterlines and sprinklers, leaking manifolds, rust and corrosion due to leaks or condensation.